Select country and language
INOXline skimmer pool
Skimmer pool INOXline
The skimmer pool is the most widely used type, especially for private projects. It is a simple, efficient system with trouble-free operation.
Water from the pool is drawn into a collector - the skimmer - from where it is pumped to the filtration system.
This is a popular solution for those who require the luxury of a stainless steel garden pool with a minimum of operational intervention.
3D model
STANDARD
In-ground pool for concreting. Right variant for poured concrete: the pool is placed on a concrete base and filled with water, while the side walls are backfilled with a dry or semi-dry concrete mix for reinforcement.
FREE-STANDING
Above-ground pool, free-standing construction - self-supporting model with a solid frame, when in-ground installation is not necessary. Ensures ease of integration into any setting and so the product will surpass any project requirements. Recommended for terraces, roofs or for sloping terrain.
Maximal dimensions
maximum internal – distance between pool walls below the top edge viz. drawing
Length (x): 1000 cm
Width (y): 350 cm
Depth (z): 140-150 cm
Stainless steel
AISI 316L – 1.4404 – brushed K400
Wall thickness: 2,5 mm
Bottom thickness: 2 mm
Variants of entrances to swimming pools
Choose the entrance staircase to your pool according to your wishes.
square diagonal steps
ISTJ
square corner steps
ISTB
square steps
ISTC
cantilevered steps
ISTX
steps along the entire pool
ISTF
Reinforced walls
The walls of the pool are reinforced with two horizontal folds to ensure the highest possible stability and strength of the entire structure.
Integrated insulation and reinforcement
The walls and floor of the pool are delivered to the installation site including insulation and reinforcement. The insulation on the pool wall is from 2 to 5 cm thick, on the bottom it is 10 cm.
Stairs with burling anti-slip surface
The stairs have an aesthetic raised-square pattern, which ensures safe use without the risk of slipping.
Stainless steel components
INOXline pools are equiped with all-stainless steel components from main manufacturers. The components are welded directly to the pool-body plates, without the use of screws or seals. The great advantage of this approach is to minimize the risk of any future leakage.
MAIN DRAIN CHANEL
This specific system ensures uniform, optimal, water circulation and highly efficient water cleaning. The channel, with its anti-slip surface, runs the full length of the pool and is equipped with multiple inlet holes. No nozzles are needed on the walls and so no pipework is required around them. The bottom suction is integrated into the drain channel.
SHAFT FOR SLATTED POOL COVER
The shaft allows the underwater-level pool-cover to be installed in a panel on the shorter side of the pool. The cover itself, therefore, does not interfere with swimming and is completely covered with a removable panel to ensure maximum safety.
Prohlédněte si detaily
Your privacy is important to us
Diamant Unipool needs your consent to the use of individual data in order to be able to show you information concerning your interests, among other things. You give us your consent by clicking on the "I agree to the use of all cookies" button.